Check items to add to the cart or select all
Product Description
- This case was designed for a 300/2.8 with a body attached, but will also hold other combinations. It is called a “compact” long lens case because the diameter is smaller than our PolyCore™ 300 case — it is too small for 400/2.8 and 600/4 lenses. It is also lighter in weight and offers less protection.
- We have had a number of complaints because the front element of 200-400s, 400/4s and 300/2.8s get lost in the diameter of this case (the diameter is designed to house a full-sized pro body w/ a quick-release plate attached). We strongly advise purchasing the L029 Foam Insert (which reduces the diameter near the front element) or consider purchasing the E660 or E970 lens pouch instead.
- Increase the height of your case — the L128 deep lid will fit these cases with a special L228 made-to-order adapter strap (the L128 was designed for the PolyCore series cases which utilize a removable lid, so this adaptation is little goofy).
Product Update: We have transitioned from a solid nylon fabric pocket (as shown in most product photos) to a mesh pocket as shown in the detail photo.
Available Models
L311 Standard model which includes Y515 Shoulder Strap & A257 Body Pouch, $ 176.00.
L311a Includes Y515, but excludes the A257 Body Pouch, $ 133.00.
L311b Includes Y515 and substitutes the deluxe pouch (M330) instead of the A257, $202.00.
Fits the Following...
- - 300/2.8 or 400/4 DO lens with any size DSLR body attached (w/ Arca-Swiss plate attached) & teleconverter with hood reversed (with leatherette cap on).
- - 500/4 or 200-400/4 lens without a body attached and the hood reversed in the stowed position.
- - 200/2 with body attached & hood extended
External Attachment Options
Sides A double-wide pouch (A257, M330 etc.) can be attached to either side of the lower side of the case, but this attachment location is a little loose which may cause the pouch to shift around a little, unless secured with a Y205 strap.
Back (flat) Side of the Case A double-wide pouch (A257, M330 etc.) can be attached to the lower back or flat part of the case, although this disables use of any backpack harness or may make using a shoulder strap awkward.
Tripod Use Remove the A257 center pouch (shown in photo above) and replace it with a T164 or T317 pouch for attaching a tripod (see this page for pix). Attach a Y204 to the top of the case to hold the top part of the tripod. The A257 can then be reattached to the upper or lower part of the case, slightly off center.
Specifications
(Realistically, this case is too large to conveniently wear on a belt).
U.S./Imperial
16.5h x 7" dia I.D.*
18h x 9" dia O.D.
Volume = 760 cu in
Weight with A257 pouch & Y515 shoulder strap: 2 lbs.
Weight w/o A257 or Y515: 1 lb. 6 oz.
Metric
42h x 17.8cm dia I.D.*
45.5h x 23cm dia O.D.
Volume = 12.5 lit
Weight with A257 pouch & Y515 shoulder strap: 907g
Weight w/o A257 or Y515: 645g
*The I.D. is the maximum diameter of the front element and/or lens cover that will fit inside this case.
The circumference is 66cm (26") and measures the entire inside perimeter of the "D" shape of the case. It is larger than 3.14 times the diameter to allow extra room for the lens tripod foot.
