[C580] Large Holster Case, $79.00
Includes V100 CameraCushion™ divider.

C580 fits a "small or large body" with "medium lens" attached as defined on this page.

Originally designed for a pro-sized 35mm SLR body (including D2x or 30D with booster, 1Ds etc.) and a 70-200/2.8. (or 80-200/2.8) lens with the hood in the storage position. Visit the holster sizing info page for info this lens.

This case will also accommodate any body/lens combo listed for the shorter C500 by using the CameraCushion™ you can elevate the body with shorter lenses so it sits near the top of the case.

When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt.

Field reports:
(3/06): "Just wanted to let you know that the C580 fits my new Hasselblad H2 with 50mm lens and shade like a glove! I may end up putting a shorter rubber eyepiece on the viewfinder, as its about 1/4" longer then desired, but that is about it. I have the RRS L bracket on for the camera."
(5/06): "I thought you would like to know that the large holster case that I ordered earlier this month fits my Hasselblad H2D with the macro 120mm lens with hood on (extended). I can just reach right in and grasp the battery grip, pull the camera out and up to my eye, support it with my left hand, and shoot. All in 5 seconds!"
(02/07): "I find that my 30D with the Canon 70-200mm f/2.8L is 10 5/8" tall. Even with my Canon 1.4x extender, it is only 11 3/4" tall and should fit in the C580."

Shown below is a legend used throughout this Website.
Sizes given are inside dimensions.
The diameter is the distance straight across the circle on cylindrical products.

U.S.
I.D. Specs

Top = 6d*x7w"
Bottom = 4.5x4.5"**
Height = 12"
Volume = 350 cu in (includes 50 cu in pocket)
Weight = 12 oz.

Metric
I.D. Specs

Top = 15d*x18w cm
Bottom = 11.5x11.5cm**
Height = 30.5cm
Volume = 5.8 lit
(includes 800 ml pocket)
Weight = 340 g

Double-wide allotment on belt.

*The C500, C580, C640 (all have the same top opening dimension) cases will yield a comfortable fit for a body up to 16cm (4.75") deep or a tight fit for a body up to 17.5cm (6.75") deep. (The depth dimension of the these cases is 15cm (6"), which is based on the rectangle-shaped opening. SLR bodies are triangular shaped, so this series of cases will house a body deeper than the rectangular "depth" dimension). Please visit this page for more sizing details.

**11.5cm (4.5") is the case design, but it will accomodate a lens up to 12cm (4.75") in diameter -- the front & rear just bulges out a little.